1. The car shell is made of magnesium alloy with ultra-lightweight (the material is the same as the UAV frame);
2. All CNC parts and die-casting appearance parts;
3. The independent front and rear bumpers are made of plastic, which same as the real car;
4. The differential gear uses powder metallurgy MIM technology, with an accuracy of ±0.02 and hardness of 47-52HRC;
5. The vehicle is equipped with rubber tires, and drift hard tires are optional;
6. Truly restore the function of the pin-type valve and the same stepless damping adjustment as the real vehicle;
7. All-metal gearbox. The gearbox gear is made of carbon steel and hardened by quenching;
8. The axle is equipped with a differential function. The differential gear is made of powder metallurgy material with heat treatment, and uses metal injection molding technology;
9. The steering component restores the design of the real car, using rack and gear;
10. The shock absorber is a needle valve shock absorber, and the damping rebound coefficient of the shock absorber can be manually adjusted through the valve on the tower top;
11. The vehicle is equipped with a brake disc, and the side of the brake disc is equipped with a vent;
12. The door and hood can be opened.
#About the Motor HOBBYWING EZRUN Brushless 3652SD G3 3300KV:
Brushed/Brushless: Brushless
Sensored/Sensorless: Sensored
Pole Count: 4
KV Rating: 3300KV
LiPo Cells: 2-3S
No-load Current(A): ≤3.9A
O.D.(mm): 37
Length (mm): 53
Shaft Diameter (mm): 3.175(0.125in)
Weight (g): 228g
Front Bearing: D13*D5*T4
Rear Bearing: D11*D5*T5
#If you have any questions or are not sure whether it is the correct item you want, pls feel free to contact me before purchasing.
